IGET GUIDE · 6 MIN READ
How to Recharge an IGET: Which Models Charge and How
Only some IGETs charge. The Bar Pro, the One and the Bar Plus S3 base take a USB-C cable. The Bar 3500, Legend, Moon, Hot and Goat are sealed single-use devices with no port, so they cannot be recharged with any cable, adapter or trick. If your IGET has no port on it, it is not meant to be charged, and a dead one is finished rather than flat.
By IGET Bar Australia. Published 2026-09-01. Last updated 2026-09-04.
Which IGET Vapes Can Be Recharged?
| Model | Rechargeable | Port | What to do when it dies |
|---|---|---|---|
| IGET Bar 3500 | No | None | Replace it, the liquid runs out with the battery |
| IGET Legend 4000 | No | None | Replace it |
| IGET Moon 5000 | No | None | Replace it |
| IGET Hot 5500 | No | None | Replace it |
| IGET Goat 5000 | No | None | Replace it |
| IGET Bar Pro 10000 | Yes | USB-C | Charge it, the liquid outlasts one battery cycle |
| IGET One 12000 | Yes | USB-C | Charge it |
| IGET Bar Plus S3 base | Yes | USB-C | Charge the base, replace the pod |
Can You Recharge an IGET Bar 3500?
No, and this is the single most searched charging question about IGET in Australia. The IGET Bar 3500 has a 1500mAh battery sealed inside and no port anywhere on the body. There is no hidden contact under the sticker, no pins in the base, nothing to plug into.
The reason is that the battery and the 12mL of liquid are sized to run out together. Charging one would give you a working battery attached to an empty tank. If you want an IGET you can plug in, the Bar Pro and the One are the two to buy.
How to Recharge an IGET Bar Pro 10000
The Bar Pro has a USB-C port in the base. Plug in any USB-C cable, use a normal phone wall plug or a laptop port, and leave it upright while it charges. There is no button to hold and no mode to select.
The Bar Pro carries 18mL of liquid against an 850mAh battery, which is why it needs charging at all: the liquid outlasts a single battery cycle by a long way. Expect to plug it in more than once over the life of one device.
How to Recharge an IGET One 12000
Same procedure, same port. The IGET One takes USB-C in the base, and with 20mL of liquid against an 800mAh battery it will want charging several times before the device is done.
If you run the One in turbo mode it drains faster, so charge it more often. Nothing about turbo changes how you charge it, only how quickly you get back to the cable.
How to Charge an IGET Bar Plus S3 Base
On the Bar Plus S3 the base holds the battery and the pod holds the liquid, so charging and refilling are two separate jobs. Take the pod off or leave it on, it makes no difference, and plug the base into USB-C.
This is the only IGET where charging is part of normal ownership rather than a rescue. The base is meant to outlive dozens of pods, so it gets charged the way a phone does.
How to Recharge an IGET With an iPhone or Android Charger
Any charger that ends in USB-C works, whether it came with an Android phone, a recent iPhone, a laptop or a power bank. The cable does not need to be an IGET one and there is no proprietary connector involved.
What will not work is a Lightning cable or an old micro-USB cable, because neither fits the port. And no charger of any kind helps on a Bar, Legend, Moon, Hot or Goat, because there is no port for it to reach.
How to Recharge an IGET Bar Without a Charger
You cannot, and the videos suggesting otherwise are describing something worth avoiding. Cutting a USB cable and touching bare wires to a sealed battery is how people cause a fire, not how they get more puffs.
If your sealed IGET has stopped, it has reached the end of its life. The battery dying and the liquid running out at roughly the same time is the device working as designed, not a fault.
How Long Does an IGET Take to Charge?
Well under an hour from flat on a normal phone wall plug, for both the Bar Pro and the One. Fast chargers do not speed it up meaningfully because the battery inside is small compared to a phone.
You do not need to wait for a full charge to use one. A few minutes on the cable is enough to get going again if you are caught short.
What the Charging Light Means
On the rechargeable models the light comes on while charging and goes out or changes when it is done. That is the only thing the light tells you during charging.
A light that flashes when you draw, rather than when you charge, is a different signal entirely. On a sealed device it usually means the battery is finished, and on a Bar Plus it usually means the pod is not seated. Those are covered in the IGET not working guide.
Charging an IGET Safely
Charge on a hard surface, not on a bed or a couch, and unplug it once the light says it is done. Do not leave one charging overnight or in a hot car, and stop using any device that gets hot, swells or smells odd on the cable.
Never try to charge a sealed IGET by force. If a device has no port, the answer is a new one, and every rechargeable model in the range is listed in the full IGET catalogue.
Frequently asked
Can you recharge an IGET Bar 3500?
No. It has no charging port and the battery is sealed inside. Only the Bar Pro, the One and the Bar Plus S3 base can be charged.
What cable does an IGET Bar Pro use?
USB-C. Any USB-C cable and a normal phone wall plug will do it, including the one from an Android phone or a recent iPhone.
How do you charge an IGET without a charger?
You do not. Splicing cables onto a sealed battery is a fire risk, not a workaround. A sealed IGET that has stopped has reached the end of its life.
How long does an IGET Bar Pro take to charge?
Usually well under an hour from flat on a standard phone plug. The light goes out or changes when it has finished.
Why does my IGET flash when I draw on it?
That is not a charging signal. On a sealed model it usually means the battery is done; on a Bar Plus it usually means the pod is not seated properly.
Can you recharge an IGET Moon or Legend?
No. Both are sealed single-use devices with no port, the same as the Bar 3500, the Hot and the Goat.